Mitsubishi Motors takes the health of our planet seriously. We have examined every aspect of our business, from designing aerodynamic, fuel-efficient vehicles to reducing emissions from our factories. We also take responsibility for disposing of the vehicles we have made when they come to the end of their lives. We take back and recycle older vehicles. Plus, we are working to make sure that in future an even higher percentage of each car can be recycled.

We use cutting-edge technology to reduce energy use and waste, while improving the quality of our products. Designers at our Japanese factory can create and 'drive' virtual cars on realistic roads. This saves the energy, materials and fuel needed to build and test a full-sized prototype. One of many innovative changes to our processes was a switch to water-based paints. This has almost eliminated the release of heavy metals in waste water from the spray shop.



Global warming is an urgent issue and the auto industry is working hard to improve fuel economy and cut CO2 emissions. Aerodynamics can play a significant role in cutting emissions, especially at highway speeds. So our brilliant engineers hone new body shapes using extensive wind tunnel experiments using scale models and computer simulations. The R&D department has even developed sophisticated Virtual Reality technology to test the aerodynamics of prototype cars before they are even made. Using the same technology, designers can 'drive' around a realistic course and even experience what a driver of a different height would see. This saves energy, materials and fuel compared with testing a prototype.

Our designers are also testing new eco-friendly materials to be used in future cars. Some of these were showcased by the Concept-cX, including Green Plastic: a family of plant-based resins. These could be used for parts including floor mats, door trim, seat-back panels and other interior trim materials.



Mitsubishi Motors aims to be one of the best car manufacturers in the world in terms of environmental performance. At the Mitsubishi factories for Mitsubishi Motors Corporation and Mitsubishi Motors (Thailand), the Environmental Management System are certified according to ISO 14001. It ensures that all environmental aspects, and even local nuisance items such as noise, are evaluated, recorded, and then reduced through a program of continuous improvement. Every aspect of our business follows the Mitsubishi 3R principle of Reduce, Reuse and Recycle.

The introduction of new processes has reduced the discharge of heavy metals into wastewater by 99% since 1989. We also use less water overall while making our cars. We have considerably reduced the emission of hydrocarbons by introduction of water based paint materials and we produce less waste and use fewer packaging materials by continuous optimizing our processes.

Mitsubishi Motors is also careful to reduce noise at all its factories. Measures include the creation of insulated 'noise zones', so neighbours don't have streams of cars passing by. Trucks are guided onto main routes, away from neighbourhoods. We will continue to reduce energy consumption and carbon dioxide (CO2) emissions and use optimal recycling techniques for new materials.


RECYCLING WORKS (End of Life Vehicles – ELV)

Mitsubishi Motors has the highest respect for the environment, and we choose materials that can be recycled and re-used after your vehicle has come to the end of its economical life. We build each car to last, but when its long life has come to an end, we will take the vehicle back and recycle it in an environmentally friendly manner, in accordance with the EC Directive on End-of-Life Vehicles and any applicable national statutory provisions.

All Mitsubishi Motors vehicles (up to 3.5t GVW) sold in Europe after July 1, 2002, will be taken back free of charge from the last registered owner at one of the designated take-back points, provided the vehicle contains all m ajor components and is free of waste. From January 1, 2007, this applies to all Mitsubishi Motors vehicles sold in Europe irrespective of the sale date. A network of collection points is available to receive Mitsubishi Motors End-of-Life Vehicles. See below for details of your nearest take-back point as well as for national ELV legislation requirements.

In the event that any vehicle is found to have additional waste added or essential components missing, the authorised take-back point has the right to make a charge. Upon accepting your vehicle for recycling, the authorised take back points will issue you with a Certificate of Destruction (COD), which is required by Transport Malta for deregistration of your Mitsubishi vehicle.

The possibilities for the recycling of vehicles and vehicle components are continually being evaluated and improved, with the aim of recycling even more parts of the vehicle in the future.

Ensuring environmental friendly recycling, vehicle manufacturers have established "International Dismantling Information System" (IDIS) several years ago. Mitsubishi is member of this information system which informs dismantlers in detail which materials are used in a vehicle and how dismantling and recycling shall be handled.

As a matter of course, Mitsubishi fulfils the European legal requirements. Our vehicles fulfil the European directive's requirements of Reusability, Recyclability and Recoverability (RRR) from a vehicles first design scratch via manufacturing, use until its end of life.

Additionally, the used manufacturing and maintenance materials etc. are monitored and registered in accordance with the "REACH"-Regulation (Regulation on Restriction Evaluation Authorisation of Chemicals).



Please note that only a Certificate of Destruction issued by an authorised ELV Treatment Centre at the time is acceptable for Transport Malta to deregister a vehicle as from 1st November, 2013. Without this document, owners will be unable to deregister a vehicle and will still be liable to pay annual road taxes and fees.

When the last owner decides that the vehicle has reached the end of its useful life, he is to take that vehicle to one of the following authorised Treatment Centres listed below or any other Treatment Centre authorized by MEPA at the time.


  • Tar-Robba Recycling Centre Ltd – Ta’ Robba Quarry, l/o Kirkop, Malta (Permit No. EP0016/13/A Issued 31/07/2013)
  • Roc-A-Go Crane Services Ltd – Triq Tal-Barrani, Zejtun (Permit No. EP 050/12/B issued 25/09/2013) 
  • Gasparell Baling Plant Ltd. - HHF 601, Hal-far Industrial Estate, Birzebbuga, BBG 3000 (Permit No. IP0004/12) Contact No: 9949 5236
  • Hompesh Processing Co. Ltd. - Triq id-Dejma, Fgura, FGR 9037 (Permit No. WM 009/08)
  • ​​ELA Ltd. - 31 Ta’ Wied Ghammieq , Kalkara Malta KKR 9062 ​(Permit No. EP 021/10) Contact No: 21 896 023
  • JAC Steel Ltd. - ​Waste Treatment Complex Qasam Industrijali, Marsa, MRS 1000 (Permit No. ​EP 010/13) Contact No: 21 664 747
  • AutoCheck Ltd. - 19/20, Triq l-Inginerija ma Triq l-Iskola Teknika, Mriehel, BKR3000 (Permit No. ​EP 054/14)
  • ​​Alfred Sammut - Plot 6 & 7, Triq in-Nassab, Qormi ​(Permit No. EP 015/16)



The environment will be one of the great challenges of the 21st century. Mitsubishi Motors endeavors to achieve sustainable environmental development and protection. The comprehensive, worldwide report of environmental protection measures have been documented in the annual environmental report of Mitsubishi Motors Japan. Information and figures on the subject of environmental protection by the Mitsubishi Motors Corporation can be found below:



Environmental initiatives and other efforts for eco-friendly manufacturing by Mitsubishi Motors Corporation